Key Product Features
- Max Width: 40’2”
- Max Height: 32’1”
- Polyurethane insulation, R-value* = 17.5, U-value* = .057
- 2” section thickness
- 10,000 cycle standard spring
- Patented, roll-formed integral struts for rigidity
- Embossed stucco exterior with pinstripes
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Door Construction
-
Joint seal prevents air infiltration and saves energy
-
Thermal break separates inner and outer skins so virtually no heat or cold is conducted through the section.
-
Pre-painted inner and outer skins for added corrosion resistance. Both skins are also hot-dipped galvanized steel for further protection against corrosion.
-
Solid polyurethane core provides maximum thermal efficiency and aids in quiet operation
-
Integral struts – Two 1-3/4” roll-formed struts per section increase rigidity and strength.
-
Two-inch nominal thickness
-
Embossed pinstriping (grooves) on the embossed stucco outer skin adds strength and enhances appearance.
IECC® Compliant
The Thermospan® Model 200 meets IECC® requirements for maximum U-factor of operable fenestrations (2015 Section C402.4) with a 3rd party certified tested value of less than 0.37. Thermospan® Model 200 also meets the ASHRAE 90.1 and IECC® requirement for maximum air leakage for fenestration assemblies (2015 Section C402.5.2 Garage doors) with a 3rd party certified tested value of less than 0.40.