Rolling Service Doors
Model 900

Wayne Dalton's Model 900 Rolling Service Door is ideal for jobs where an economical solution, as well as durability and strength are needed. This door offers flexibility in curtain materials with choices of galvanized steel, stainless steel, or aluminum.

Our Model 900 rolling service steel doors are composed of curved or flat-faced slats that provide a natural watershed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

Model 900 features a strong double-angle bottom bar designed for easy installation and does not require fasteners in the guide openings, so the bottom bar does not interfere with door operation.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.)

Contact a Specialist

Features

Key Product Features

Max Width: 14’*
Max Height: 14’*
Mounting: Face of wall or between jambs
Operation: Manual push-up: chain hoist where door weight exceeds manual effort
Curtain: 2" galvanized steel curved slats (#2 profile), primed gray, white, beige or brown; 24-gauge steel with alternating endlocks
Locking: Slide bolts on manual operation; padlockable chain keeper with chain hoist (padlock not included)
Bottom Bar: Galvanized steel double angle with weatherstrip
Guides: G-guide design; steel factory painted black
Brackets: 1/4" or 3/16" steel plates with permanently sealed ball bearings
Counter Balance: Steel pipe of adequate size to restrict a maximum deflection of .033" per linear foot. Oil tempered, 20,000 cycle helical springs
Hood: 24-gauge galvanized steel round hood; primed gray, white or beige
Wind Load: Standard wind load rated with a minimum of 20 psf

*Larger sizes may be available. Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge. Consult factory for more information. 800-764-1457

Slat Profiles

- No. 2
- No. 17
- Secur-Vent^®

No. 2 - Curved-faced single crown slat available in up to 20-gauge steel, 20-gauge stainless steel, or up to 18-gauge B&S aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1/8" on centers.

No 17 - Flat-faced slat in up to 20-gauge steel, 20-gauge stainless steel, or 16 B&S gauge aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1 7/8" on centers.

Secur-Vent^® - Perforated slat provides optimal security and ventilation. Slat consists of 1/16" diameter hole offereing 20 to 25% open area over length of each slat. Available in No. 17 flat slat up to 14' wide x 12' high.

See our Model 900 Slat Profiles document for more profiles and details

Door Options

Options & Accessories

Operation: chain hoist, motor, motor with chain hoist, wall crank, awning crank, through wall option available
Curtain: #2 slat profile 2" curved up to 20-gauge steel; 20 or 22-gauge stainless steel; 18-gauge aluminum #17 slat profile 2" flat up to 20-gauge steel; 20 or 22-gauge stainless steel; 16 ga. extruded aluminum
Curtain finish: stainless steel #4, mill, clear or bronze anodized aluminum, G-90 galvanized bare or painted gray, powdercoat (RAL and custom)
Locking: slide bolts, cylinder, Best lock, thumb turns
Guides: three angle: galvanized steel, stainless, aluminum
Bottom bar: stainless steel or aluminum double angle, extruded aluminum angle, structural steel angle (galvanized steel only), sloped
Bottom bar & guide finishes: Primed black finish, stainless steel #4, powdercoat (RAL and custom); hot dipped galvanized; mill, clear or bronze anodized
Bottom edge: astragal, pneumatic or electric sensing edge
Hood: 22-gauge steel; square hood; finishes: mill, clear or bronze anodized aluminum, bare galvanized, stainless steel #4, powdercoat (RAL and custom)
Brackets finish: Galvanized (hot dipped), stainless steel #4, powdercoat (RAL and custom)
Perimeter seals: angled guide brush seal, vinyl guide seal, exterior and interior lintel weather seal, internal hood baffle
Barrel: up to 200,000 cycle barrel
Wind load: up to +/- 31 psf
Other options: Secur-Vent perforated slats, drop stop device, end covers, fascia, spark resistance

Wind Load Options

Options up to ±31 psf

Colors

Finish Options

Options

White
Gray
Beige
Brown

RAL Powder Coat

Approximately 200 powder coat options available to complement the exterior colors of a building.

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Please contact your Wayne Dalton Dealer for actual color samples to match with your home or business.

Documents

Download documents in the Architect Resource Center.

BIM files on ARCAT

Rolling Service Doors Model 900