Rolling Steel Storm Shelter Doors 800F, 800FR, 800FE

Rolling Steel Storm Shelter Doors 800F, 800FR, 800FE

Our Rolling Steel Shelter Door series is designed to provide the ultimate protection for a variety of important applications. Whether you need to secure a school, emergency operations center, storefront, or saferoom, these doors have got you covered. Our shelter doors are certified to withstand the most extreme conditions, including tornadoes (800F), fire (800FR), and forced entry (800FE) providing a combination of safety, function, and durability. 

Ideal Applications Include:

Storm Shelters | Schools | Emergency Operations Centers | Gymnasiums | Storefronts | Safe Rooms 


Standard ConstructionModel 800FModel 800FRModel 800FE
Max. Width16'11'16'
Max. Height16'11'16'
Curtain12-gauge galvanized steel12-gauge galvanized steel 12-gauge galvanized steel
Slat Profile6' curved slats6' curved slats6' curved slats
FinishGray Powder CoatGray Powder CoatGray Powder Coat
Hood24-gauge galvanized steel24-gauge galvanized steel 24-gauge galvanized steel
Standard MountingFace-of-wallFace-of-wallFace-of-wall
OperationGenie GCL-GH operatorGenie GCL-H fire door operatorGenie GCL-GH operator
Control PanelStandard 3 button controlStandard 3 button controlStandard 3 button control
Standard Spring10,000 cycle 10,000 cycle10,000 cycle 
Guides Three steel anglesThree steel anglesThree steel angles
Bottom BarDouble angle steelDouble angle steel Double angle steel 
ObstructionWireless Sensing EdgeWireless Sensing EdgeWireless sensing Edge

Tested: +/- 300psf (ICC-500/FEMA 361)
Tornado: +/- 250psf (ICC-500/FEMA 361)
Hurricane: +/- 250psf (ICC-500/FEMA 361)

Impact Rated: Up to 100mph: +/- 200psf (ICC-500/FEMA 361)

Tested: +/- 300psf (ICC-500/FEMA 361)
Tornado: +/- 250psf (ICC-500/FEMA 361)
Hurricane: +/- 200psf (ICC-500/FEMA 361)

Warnock Hersey(WH): UL 10B NFPA 252 and CAN/ULC S104 | Fire rated for up tp 4 hours

Impact Rated: Up to 100mph

Forced Entry ASTM F3038: ASTM F3038-21 | Up to 30 minutes

Ballistics: .22 & .38 Special (NIJ 0108.01)

*The Wayne Dalton Rolling Steel Door passed all criteria for: ASTM F3038-21, Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems, Forced Entry Resistance: 30 minutes, and NIJ Standard 0108.01, Ballistic Resistant Protective Materials, National Institute of Justice, September 1985. Wayne Dalton is a division of Overhead Door Corporation.


Windload Ratings 

  • End stiles wrap around the exterior of each section to protect the section face from wear caused by the door jambs
  • Comes in a wide variety of sizes and configurations that provide durability and value
  • The exterior skin helps increase strength while enhancing the building’s visual appearance


  • 36-Months; 10K cycle limited on door system