Aluminum Full-View Doors Model 451 & 452

Sectional | Aluminum | Model 451 | White Powder Coat | Clear
Sectional | Aluminum | Model 451-452 | Clear Anodized | Clear
Sectional | Aluminum | Model 451-452 | Clear Anodized | Clear
Sectional | Aluminum | Model 451| Green Custom Powder Coat | Clear
Sectional | Aluminum | Model 451-452 | Brown Powder Coat | Satin Etched
Sectional | Aluminum | Model 452 | Clear Anodized | Clear
Sectional | Aluminum | Model 452 | Custom Powder Coat | Clear
Sectional | Aluminum | Model 452 | Black Powder Coat | Clear

Aluminum Full-View Doors Model 451 & 452

Perfectly suited for applications where maximum light and visibility are desired, the Aluminum Full-View commercial glass doors are engineered for strength and durability while delivering a look that is both modern and elegant. With their sleek contemporary styling, these doors are right at home in a wide variety of settings that range from a five-star restaurant on the seaside to a brewery and many more. Customizable with anodized and powder coated finish options, paint colors, glass choices and solid or glass panels, these commercial glass doors create a modern open look to complement your business.

Models 451 and 452 are available in the Central and Eastern regions of the United States.

Ideal Applications Include:Distribution Centers   |  
  Auto dealerships     |  
Car washes   |   
 Restaurants     |    
Bars    |   
Service Bays             

Contact a Specialist Find A Wayne Dalton Dealer

Features

Standard Construction	Model 451	Model 452
Max. Width	22’ 2”	22’ 2”
Max. Height	16'1"	14'1"
Door Assembly	Stile and rail assembly of aluminum alloy 6063-T6, 1-3/8" thick stiles and rails	Stile and rail assembly of aluminum alloy 6063-T6, 1-3/8" thick stiles and rails
Operation	Electric operator, chain hoist, or pull rope	Electric operator, chain hoist, or pull rope
Rails	Top, upper, intermediate, and bottom rails ranging from 1-5/8” to 3-1/2" wide with a minimum wall thickness of 0.062"	Top, upper, intermediate, and bottom rails ranging from 1-5/8” to 3-1/2" wide with a minimum wall thickness of 0.062"
Stiles	Single end stiles are 3-1/2" wide, center stile 3" wide, minimum wall thickness 0.062"	Single end stiles are 3-1/2" wide, center stile 3" wide, minimum wall thickness 0.062"
Spring Cycles	10,000	10,000
Track	Provide track as recommended by the manufacturer	Provide track as recommended by the manufacturer
Weatherstripping	Flexible bulb-type strip at bottom section	Flexible bulb-type strip at bottom section
Locking	Interior mounted slide lock	Interior mounted slide lock
Air Infiltration (IECC)	0.4 cfm/ft2	0.4 cfm/ft2
R-value* (optional)	No	3.97
Wind Load*** (optional)	Yes***	Yes***

Glass Types	U-factor	R-value** 10’ x 10’ door	R-value** 12’ x 12’ door	R-value** 14’ x 14' door
1/2" Insulated glass Solar Ban 70XL argon filled with polyurethane-filled rails and stiles	.31	3.97	3.92	3.91
1/2" Insulated glass Low E with polyurethane-filled rails and stiles	.28	3.31	3.25	3.25
1/2" Insulated glass with polyurethane-filled rails and stiles	.31	2.79	2.69	2.69

*U-factor is independently tested and verified per ANSI/DASMA 105 using solid doors and specific product sizes.
**Wayne Dalton uses a calculated door section R-value for our insulated doors.
***Only internally approved wind load reinforcement is available to withstand conditions in wind prone areas.

Benefits

Durable Design

1-3⁄8" thick section with special reinforcing design
Large glass panels allow maximum light and visibility
Minimizes air flow with a vinyl seal between the section seals

Warranty

1-Year against defects in materials and workmanship

Safety Focused
- Broken cable devices
- Safety Edges
- Photo eyes
High-Performance Design
High Cycle Spring Options
- 25,000
- 50,000
- 100,000
Available with internally approved wind load reinforcement. Static (Non-impact) Wind Load designs are based on engineering analysis and although not certified by FBC, TDI, or Miami-Dade, the designs are compliant with the 2015 IBC.
*Proper door selection is the responsibility of the business owner. Please consult your local building code official, certified engineer or architect for wind load requirements in your specific location.
Windload Commercial Doors

Solid or Glass Panel Options

Solid aluminum panels may be specified in lieu of glass
Polycarbonate, various glass thicknesses, and custom glazing are also available

Glass Type	Thickness	Tint	Model 451	Model 452
Annealed	1/2" Insulated	Clear, Gray, Stain Etched		X
	1/2" Low E	Clear		X
	1/4"	Clear, Gray, Bronze, Satin Etched		X
	1/8"	Clear, Gray, Bronze, Satin Etched	X
Tempered	1/2" Insulated	Clear, Gray, Bronze, Satin Etched		X
	1/2" Low E	Clear		X
	1/4"	Clear, Gray, Bronze, Satin Etched		X
	1/8"	Clear, Gray, Bronze, Satin Etched	X
	1/8"	Clear, Gray, Bronze, Solex Green, Satin Etched	X
Wire	1/4"	Clear		X
Laminated	1/4"	Clear		X
Acrylic	1/8", 1/4"	Clear		X
Polycarbonate	1/8", 1/4"	Clear	X
Polycarbonate	1/8", 1/4"	Clear	X

Weather Stripping Options

Jamb seals
Header seals

Colors

Powder Coat Finish

White
Bronze
Brown
Black

Anodized Finish

Clear (Standard)
Bronze
Black

RAL Powder Coat*

Approximately 200 powder coat options are available to complement the exterior colors of a building.

Custom RAL garage door paint colors

*Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Actual physical representation may vary slightly in color.

Select All
Please select a file. 0 Files Selected

Aluminum Full-View Doors Model 451 & 452

Aluminum Full-View Doors Model 451 & 452

Ideal Applications Include: