Commercial Glass Sectional Doors

Model 464

Full-View Aluminum Door

Model 464 features a new design that seamlessly integrates indoor and outdoor spaces. Frameless glass panels are mounted on an aluminum structure for an ultra-modern look. Model 464 is available in five different glass finishes and five aluminum structure finishes. Weather-resistant and low maintenance, the Model 464 is ideal for commercial applications such as restaurants, auto dealerships, and even as an interior room divider.

Built on our rugged aluminum structure, the door is designed for long life. Glass is adhered to the front of the door using the same adhesive as on skyscrapers. A vinyl seal between the section seals the section break, minimizing air flow.

Contact a Specialist

Features

Key Product Features

Max Width: 18'2" (5486 mm)
Max Height: 14'1" (4318 mm)
Door Assembly: Stile and rail assembly of aluminum alloy 6063-T6, 1 3/4" thick stiles and rails, joined with self tapping screws
Rails: Top and bottom rails with 3 1/2" wide, lower intermediate rail 1 3/8", upper rail 1 5/8", minimum wall thickness 0.062"
Stiles: End stiles are 3 1/2" wide, center stile 3" wide, minimum wall thickness 0.062"
Springs: 10,000 cycles
Track: Provide track as recommended by manufacturer to suit loading required and clearances available

Air Infiltration

Meets ASHRAE 90.1 and IECC^® air infiltration requirements with a third-party tested value of less than 0.4 cfm/ft2
Meets California Code of Regulation, Title 24 air infiltration requirements with a third-party tested value of less than 0.3 cfm/ft2

Door Construction

Large glass panels allow maximum light and visibility
1-3/8" thick section with special reinforcing design
Vinyl seal between sections
2-1/4" integrated reinforcing rib on upper intermediate rail for doors 10'3" wide and over
Flexible vinyl bottom door seal

Door Options

Glass Options

Opaque White
Opaque Black
Mirrored Gray
Mirrored Bronze
Translucent Black

Options & Accessories

Springs: 25,000, 50,000 or 100,000 cycles
Jamb and header seals
White or Black powder coat track

Colors

Finishes

Anodized

Black
Bronze

Powder Coat

White
Bronze
Black

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Please contact your Wayne Dalton Dealer for actual color samples to match with your home or business.

Actual door colors may vary slightly from the website images due to fluctuations in paint or anodizing process.

Documents

Download documents in the Architect Resource Center.