Commercial Glass Aluminum Doors

Key Product Features

• Max Width: 22’2” (6,705.6mm)
  
• Max Height: 14’1”  (4,297.7mm)
  
• Door Assembly: Stile and rail assembly of aluminum alloy 6063-T6, 1 3/8" thick stiles and rails, joined with self tapping screws.
  
• Air Infiltration: Meets IECC^® requirements for air infiltration with 3rd party tested values below 0.4 cfm/ft². 
  
• Rails: Top and bottom rails with 3 1/2" wide, lower intermediate rail 1 3/8", upper rail 1 5/8", minimum wall thickness 0.062".
  
• Stiles: Single end stiles are 3 1/2" wide, center stile 3" wide, minimum wall thickness 0.062".
  
• Springs: 10,000 cycles
  
• Glazing: 1/8" (3mm) in 9 options, 1/4" (6 mm) in 5 options, 1/2" (13 mm) in 4 options, 5/8" (16 mm) in 3 options.
  
• Finish: Clear anodized.
  
• Wind Load: Provide to meet the design/performance requirements specified.
  
• Lock: Interior mounted slide lock.
  
• Weatherstripping: Flexible bulb-type strip at bottom section.
  
• Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
  
• Manual Operation: Pull rope or chain hoist.
  
• Electric Motor: Provide UL listed electric operator, equal to Genie Commercial Operators, size and type as recommended by manufacturer to move door in either direction at not less than 2/3 foot or more than 1 foot per second.
  

Door Construction

 

1.  Aluminum glazing stop
2.  Large glass panels allow maximum light and visibility
3.  1-3/8” thick section with special reinforcing design
4.  Vinyl seal between sections
5.  2-1/4” integrated reinforcing rib on upper intermediate rail for doors 10’3” wide and over
6.  Aluminum panels that match the rail color available.
7.  Flexible vinyl bottom door seal
   

Optional Insulated Frame

Polyurethane-filled stiles and rails adds R-value* up to 3.97

Polyurethane insulation in the rails and stiles are an available option. Polyurethane insulation fills the entire cavity and offers better R-value per inch than polystyrene insulation.

*Wayne Dalton uses a calculated door section R-value for our insulated doors.

• 
  Low E
• 
  Clear Wire
• 
  Bronze Tinted
• 
  Gray Tinted
• 
  Clear (1/8" standard)
  

Solid aluminum panels may be specified in lieu of glass. Polycarbonate, various glass thicknesses and custom glazing also available.

Options & Accessories

• Lock options: interior mounted slide lock with interlock switch for automatic operator, keyed lock, keyed lock with interlock switch for automatic operator.
• Weather stripping: jamb and header seals.
• Wind load: available up to ±30 psf, up to 16’2” wide

• 
  Clear (standard)
• 
  Bronze
• 
  Black

• 
  White 
• 
  Bronze
• 
  Brown
• 
  Black

RAL Powder Coat

Wayne Dalton also offers approximately 200 powder coat options to complement the exterior colors of a building.

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Please contact your Wayne Dalton Dealer for actual color samples to match with your home or business.