rolling service door

Key Product Features:

  • Standard Max Width 12’
  • Standard Max Height 12’
  • Galvanized steel construction
  • 26-gauge flat slats

Options & Accessories:

  • Slide Bolt Locks
  • Hood
  • Vinyl Weatherseal for Curtain, Lintel Brush and Rubber Hood Baffle
  • Motor Operator
  • Bottom Bar Sensing Edges
  • Optional powder coat finish

Slat Profiles

See our Model 926 Slat Profiles document for more profiles and details.

slat profile
No. 17 Slat Profile

Factory Finish Colors



IMPORTANT NOTICE: Due to variations in computer monitors, such as resolution and color settings, this standard color chart should only be used as a general guide. If you have a job where you need to be exactly sure of the accuracy of the color shade shown, please contact a customer service representative by using the "Contact Us" link at the top of this page.

Materials & Construction

Wayne Dalton’s Model 926 rolling service doors are composed of flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils. The Model 926 features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation. Zinc plated, cast iron windlocks add strength and prevent lateral slat movement.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper countebalance. Oil-tempered, torsion-type counterbalance springs are wound from ASTM A229 steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbalance mechanism. Slat hoods are available.