Sign In

Model 8450 Luminous™ 

Aluminum Glass Garage Door​

Wayne Dalton Advantages

A revolutionary new aluminum full-view aluminum door from Wayne Dalton, Model 8450 Luminous™ is stylish and sleek. Glass panels are mounted on top of an aluminum structure for an ultra-modern, frameless look on an easy-to-maintain door. The upscale features of this frameless door. Model 8450 offers mirrored and opaque glass options as well as powder coat and anodized options for the aluminum structure of the garage door.

Design

Single Car

8x7 exterior view aluminum garage door
8x7 exterior view

8x7 interior view aluminum garage door
8x7 interior view


Double Car

16x7 exterior view aluminum garage door
16x7 exterior view

16x7 interior view aluminum garage door
16x7 interior view


Colors

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s). Please contact your local Wayne Dalton Dealer for actual color samples to match with your home or business.

Actual door colors may vary slightly from the website images due to fluctuations in paint or anodizing process.

Glass

Insulated glass is not available on Model 8450 Luminous™.

Features
  • Effective Joint Seals – Snug-fitting tongue-and-groove section joints help prevent wind and weather from entering the garage.
  • Bottom weather seal blocks draft and debris from entering the garage.
  • Reinforcing fins on all top sections, and as needed on intermediate sections, provide years of smooth, trouble-free operation. The fins are the extruded part of the door sections and are not visible through the glass
  • Constructed with anodized or powder coated aluminum structure with equal panel spacing.
  • Meets ASHRAE 90.1 and IECC air infiltration requirements with a third-party tested value of less than 0.4 cfm/ft2
  • Meets California Code of Regulation, Title 24 air infiltration requirements with a third-party tested value of less than 0.3 cfm/ft2
Documents